
Zhongshan Langke Electronic Factory
Guangdong, China
Find Similar Products
Product Description
Company Info
Basic Info.
Model NO.
LK-3301
Product Description
Vibration remote control alarm
MODEL: LK-3301
Product introduction:
This is a new product which uses the full-orientation vibrant sensor with the wireless remote control technology. The circuit is designed elaborately. It is produced by the import elements. The capability is steady and convenience to use. It's a full-new concept and the ideal choice to guard against thefts in house, cars, and some other valuables' wealth safety, etc.
Technical Parameter:
Voltage: DC 4.5V (3 batteries of 51.5V)
Volume: 120 decibels
Mode of the Reaction: Vibrant Alarm
Time to boot-strap: 10 seconds
Method of Installation: Riveted with pastern or screw
Product Size: 97*63*23
Controlling Distance: About 30 meters
Packing Size: 210*97*25
Open the battery board, distinguish anode and cathode, put into 3 batteries of AA 1.5V (in order to prolong the life of the products, suggest to use the alkaline batteries), and then cover the board.
Put the switch onto "ON", press the" "on the remote control, it will turn in to the guarding status after 5 seconds., press " ", it withdraws the defense.
If there are any quivers on the alarm, it will send out 120 decibels warning sound, about 20 seconds.
When the volume becomes low obviously, please change the battery immediately. If you do not use it in a long time, please take off the battery.
MODEL: LK-3301
Product introduction:
This is a new product which uses the full-orientation vibrant sensor with the wireless remote control technology. The circuit is designed elaborately. It is produced by the import elements. The capability is steady and convenience to use. It's a full-new concept and the ideal choice to guard against thefts in house, cars, and some other valuables' wealth safety, etc.
Technical Parameter:
Voltage: DC 4.5V (3 batteries of 51.5V)
Volume: 120 decibels
Mode of the Reaction: Vibrant Alarm
Time to boot-strap: 10 seconds
Method of Installation: Riveted with pastern or screw
Product Size: 97*63*23
Controlling Distance: About 30 meters
Packing Size: 210*97*25
Open the battery board, distinguish anode and cathode, put into 3 batteries of AA 1.5V (in order to prolong the life of the products, suggest to use the alkaline batteries), and then cover the board.
Put the switch onto "ON", press the" "on the remote control, it will turn in to the guarding status after 5 seconds., press " ", it withdraws the defense.
If there are any quivers on the alarm, it will send out 120 decibels warning sound, about 20 seconds.
When the volume becomes low obviously, please change the battery immediately. If you do not use it in a long time, please take off the battery.
Send your message to this supplier
People who liked this also liked